Product ID:SCULP-METAL MODELING METAL
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006750
MSDS Number: BBWKP

SCULP-METAL CO/PITTSBURGH, PA 15222

Emergency Phone: (412) 681-6669

Cage: 23256

SCULP-METAL CO/PITTSBURGH, PA 15222

Cage: 23256

ADDITIVES

Fraction By Weight: 15%

_

Fraction By Weight: _

ACGIH TLV: _

PIGMENTS

Fraction By Weight: 40%

VEHICLE

Fraction By Weight: 20%

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 25%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Effects of Overexposure:SHORTENING OF BREATH, SIGNS OF APPARENT
INTOXICATION IN PROLONGED USE IN CONFINED AREAS.

First Aid:INHALATION: REMOVE TO FRESH AIR & CALL PHYSICIAN. IF
BREATHING IS STOPPED, GIVE ARTIFICIAL RESPIRATION. DO NOT INDUCE
VOMITING. IF SKIN BECOMES IRRITATED, FLUSH THOROUGHLY WITH COLD
WATER.

Flash Point:48F TOC
Extinguishing Media:WATER OR ANY APPROVED EXTINGUISHING AGENT
Fire Fighting Procedures:VENTILATE AREA THOROUGHLY TO OPEN AIR.
Unusual Fire/Explosion Hazard:DON'T USE NEAR FIRE OR OPEN FLAME OR
CLOSELY CONFINED NON-VENTILATED AREAS. DON'T STORE >120F.

Spill Release Procedures:REMOVE TO OPEN AIR IN PASTE FORM. AFTER
HARDENING - ANY NORMAL DISPOSAL METHOD.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, OPEN FLAME. USE
AT TEMPERATURES 40F TO 100F. DO NOT VENTILATE VAPORS THROH CENTRAL
AIR CONDITIONING SYSTEMS.

Respiratory Protection:AVOID PROLONGED BREATHING OF VAPOR.
Ventilation:LOCAL EXHAUST/MECHANICAL: OPEN AIR
Eye Protection:WEAR GOGGLES
Supplemental Safety and Health
MSDS UNDATED. LIQUID ALUMINUM PASTE

Vapor Density:.90
Appearance and Odor:PUTTY-LIKE MIXTURES; ACETONE ODOR.

Stability Indicator/Materials to Avoid:YES
OIL/VINYL BASED PAINTS & MATERIALS/LACQUER/PLEXIGLASS/RUBBER
Stability Condition to Avoid:DO NOT STORE >120F.
Hazardous Decomposition Products:NONE

Waste Disposal Methods:BEFORE HARDENING - SEAL IN CONTAINER AND PLACE
IN NON-BURNABLE REFUSE. AFTER HARDENING - ANY NORMAL DISPOSAL
METHOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.